... (PPT) ratio. The PPT ratio controls the size of the page table that is used ... installation of IBM PowerVC that is managing the existing PowerVM ... Power System LC922 and Power Chapter 2. Management and virtualization 41.
Enterprise Data Warehouse Optimization with Hadoop on IBM Power Systems Servers
... following benefits: Fine-grained scheduling: Apache Spark uses a coarse ... all tenants. Multiple resource scheduling policies (first-in first-out (FIFO)/ ... Data Warehouse Optimization with Hadoop on IBM Power Systems Servers.
IBM PowerVC Version 2.0 Introduction and Configuration
... support Dell EMC PowerMAX support VMAX REST driver upgrade Redundant Mover Service Partitions (MSP) for Live ... license key injection Hitachi GAD support Initiator storage tagging Live Partition Mobility (LPM) VMs to the original system ...
... aixlparâ command, where aixlpar should be replaced by a unique initiator name. You can also create iSCSI Protocol Devices by using the fast path smitty addiscsisw, as shown in Example 1-27. Example 1-27 Add an iSCSI Target Protocol Device ...
... IBM Redbooks. FLOP FRU FTP GDPSÂź GID GPFS GUI HACMP HBA HMC HTML HTTP Hz I/O IBM IDE IEEE IPAT IPL IPMP ISV ITSO IVM JFS L1 L2 L3 LA ID IP LACP LAN LDAP LED LMB LPAR LPP LUN LV LVCB LVM MAC Mbps MBps MCM ML MP MPIO MTU NFS NIB NIM NIMOL ...
IBM Certification Study Guide eServer p5 and pSeries Administration and Support for AIX 5L Version 5.3
... chsh command changes a user's login shell attribute. The shell attribute defines the initial program that runs after a user logs in to the system. This attribute is specified in the /etc/passwd file. By default, the chsh command changes ...
IBM eServer Certification Study Guide eServer p5 and pSeries Enterprise Technical Support AIX 5L V5.3
Scott Vetter, Tierry Huche, David Kgabo, Hansjoerg Schneider, IBM Redbooks. FRU FTP GDPSÂź GID GPFS GUI HACMP HBA HMC HTML HTTP Hz I/O IBM IDE IEEE IPAT IPL IPMP ISV ITSO IVM JFS JFS2 L1 L2 L3 LA ID IP LACP LAN LDAP LED LMB LPAR LPP LUN ...
... IBM Redbooks. ESS F/C FC FC_AL FDX FLOP FRU FTP GDPSÂź GID GPFSTM GUI HACMPTM HBA HMC HTML HTTP Hz I/O IBM ID IDE IEEE IPAT IPL IPMP ISV ITSO IP IVM JFS L1 L2 L3 LA LACP LAN LDAP LED LMB LPAR LPARs LPP LU LUN LUs LV LVCB LVM MAC MBps MCM ...
IBM PowerVM Virtualization Managing and Monitoring
... pre-fetching on POWER7 processor-based systems. Pre-fetch depth and stride values are adjusted in an attempt to avoid L3 cache misses. For example, a high depth value is desirable for sequential access to data and a low depth for random ...
IBM PowerVM Virtualization Introduction and Configuration
... IBM Redbooks. FDX FLOP FRU FTP GDPSÂź GID GPFSTM GUI HACMPTM HBA HMC HTML HTTP Hz I/O IBM ID IDE IEEE IPAT IPL IPMP ISV ITSO IVM JFS L1 L2 L3 IP LA LACP LAN LDAP LED LMB LPAR LPP LUN LV LVCB LVM MAC Mbps MBps MCM ML MP MPIO MTU NFS NIB ...
IBM PowerVM Live Partition Mobility (Obsolete - See Abstract for Information)
Scott Vetter, John E Bailey, Thomas Prokop, Guido Somers, IBM Redbooks. FDX FLOP FRU FTP GDPSÂź GID GPFSTM GUI HACMP HBA HEA HMC HPT HTML HTTP Hz I/O IBM ID IDE IEEE IPAT IPL IPMP ISV ITSO IVM JFS JIT IP L1 L2 L3 LA LACP LAN LDAP LED LHEA ...
... uft probe manager currently accepts a 5-tuple probe specification only in the following format: uft:<processID>:*:<function_name>:entry Note that the uft probe manager requires the process ID for the process to be traced and the ...
... uft:$__CPID:*:foo:exit when (__rv < 0) { } printf(â\nThe foo function failed with error code %dâ,__rv);. 1.10.3. Module. name. support. in. user. probes. The user function trace uft probe manager has been enhanced to allow the module name ...
IBM System p5 Approaches to 24x7 Availability Including AIX 5L
... smit or smitty process: â Run the smitty install_bundle or smit install_bundle command. â Specify the INPUT device and directory for software. If the location is a directory, such as /usr/sys/inst.images, verify the following: âą The ...
PowerVM Migration from Physical to Virtual Storage
... AIX smitty mkcd command The mkcd command line from an AIX shell Choose whichever method is appropriate for your environment. Using smitty to make the required images The following steps detail the use of smitty to create the required ...
Enhancing the IBM Power Systems Platform with IBM Watson Services
... AIX, create a file system for ibm-redbooks by completing the following steps: i. Run the command in Example 5-1 to run smitty. Example 5-1 Running the smitty tool smitty jfs2 Note: The smitty command starts the System Management ...
Service Procedures for Linux on IBM Power Systems Servers
... grub2: 1. Open the /etc/default/grub file by using a text editor. 2. Find the entry for the ... grub2-mkconfig -o /boot/grub2/grub.cfg (on RHEL) to update the grub2.cfg file. 5. Restart the system. For more information about the screen ...
IBM Power Systems HMC Implementation and Usage Guide
... Wizard opens (Figure 5-34). Figure 5-34 Install HMC Corrective Service Wizard The Wizard guides you through five steps: 1. The first window shows the HMC Release Level with some further information. Click Next. 2. In the next window ...
IBM Power 710 and 730 (8231-E2B) Technical Overview and Introduction
... features and leadership performance of the Power Systems platform. PowerVM features leading technologies such as Logical Partitioning, IBM Micro-PartitioningTM, Power Hypervisor, Virtual I/O Server ... 3.5 PowerVM 3.5.1 PowerVM editions.
IBM Power 720 and 740 (8202-E4B, 8205-E6B) Technical Overview and Introduction
... features and leadership performance of the Power Systems platform. PowerVM features leading technologies such as Logical Partitioning, IBM Micro-PartitioningTM, Power Hypervisor, Virtual I/O Server ... 3.5 PowerVM 3.5.1 PowerVM editions.
IBM Systems Director Management Console: Introduction and Overview
... IPv6 protocols. The IP addresses specified in the System Discovery page must adhere to the following rules: The ... compression can be used to replace one or more consecutive instances of â0â in an IP address. The IPv6 loopback address ...
IBM Power E1080 Technical Overview and Introduction
... disk drives. The ESLS supports SSDs and HDDs. The ESLS storage enclosures are connected to system units by using a serial-attached SCSI (SAS) port in the SAS adapters. The EXP24SX is a storage expansion enclosure with 24 2.5-inch small ...
IBM Power 750 and 760 Technical Overview and Introduction
... serial-attached SCSI cablesâ in the information center: http://pic.dhe.ibm ... Storage Disk Enclosure is not supported with the Power 750 and Power 760 ... TotalStorage EXP24 disk drawer and tower 2.10.5 IBM 7031 TotalStorage EXP24.
IBM Power 770 and 780 (9117-MMC, 9179-MHC) Technical Overview and Introduction
... serial-attached SCSI cable planning documentation: http://pic.dhe.ibm.com ... storage backplane, providing an external SAS port, or using the following ... attached to a Power 710 and Power 730 server. Notes: An existing EXP12S SAS ...
IBM Power Systems H922 and H924 Technical Overview and Introduction
... SAP. HANA. on. POWER. SAP HANA customers are moving their workloads to IBM Power Systems to take advantage of a hardware platform that was designed specifically to support big data and analytics workloads, while also providing enterprise ...
IBM Power System E850 Technical Overview and Introduction
... SAP HANA Power Systems Solution Editions for SAP HANA provide starting configurations that allow customers to quickly deploy HANA and grow with ... Technical Overview and Introduction 1.7 Build to order 1.8 IBM Solution Edition for SAP HANA.
This website uses cookies and collects data for optimal performance. Your continued use signifies agreement to our Privacy Policy.
