... Materials A continuous strip of joint bearing material is extended over the full length of the joint and serves four separate ... Wall System Wall Drainage Barriers and Copings Horizontal Joint Bearing Materials Obstruction Avoidance Details.
... ASTM A123 / A123M ( ASTM 2000c ) ( AASHTO M111 ) for a Class II coating . The minimum galvanization thickness of 86 mm ( 2 oz / ft2 ) is in conformance with AASHTO requirements . The structural design section is sized to provide the ...
Evaluation Findings for Dynamic Isolation Systems, Inc. Elastomeric Bearings: Technical Evaluation Report
... STEEL SHIMS ASTM A570 Gr36 . 2. DIMENSIONS ARE IN INCHES . 3. DO NOT SCALE THIS DRAWING . 11 GA . STEEL SHIMS 19 LA 3 THK . RUBBER LAYERS 20 LA 26.50- SEE TOP PLATE FOR HOLE PATTERN 22.5 ISOLATOR ( DIMENSION A ) DESIGNER DMJ APPROVAL 1 ...
Guidelines for Evaluating the Performance of Highway Sound Barriers
... ASTM D 4214 Title : Standard Test Methods for Evaluating Degree of Chalking of Exterior Paint Films Summary : Through the comparison with photographic reference standards , or the use of a worksheet , this test method establishes a ...
Evaluation of the Maccaferri Terramesh System Retaining Wall
... AASHTO requirements with respect to major obstructions to the normal placement of the reinforcement . Property Test ... T - 85 AASHTO T - 96 AASHTO T - 104 AASHTO T - 103 Not supplied The Terramesh System shall be manufactured with all ...
Evaluation of the Green Terramesh Reinforced Slope System: Final Report
... ASTM A82 ( ASTM , 2002a ) and shall be welded into the finished mesh grid in accordance with ASTM A185 ( ASTM , 2002a ) . Galvanization shall be applied after the mesh is fabricated and conform to the minimum requirements of ASTM A123 ( ...
Evaluation of the CON/SPAN Wingwall System: Technical Evaluation Report
... manual copyrighted 1995/1997 by CON / SPAN Bridge Systems was submitted and ... manual is included in Appendix D. The Installation Handbook provides guidelines for site and foundation ... QA/QC 5.2 Design QA/QC 5.3 Construction QA/QC.
Evaluation of the Tensar ARES Retaining Wall System
Highway Innovative Technology Evaluation Center (U.S.). CHAPTER 4 Quality Control / Quality Assurance Systems Q A / QC ... manual , dated March 3 , 1997 , was submitted , which provides all Tensar - required testing and acceptance limits . It ...
... Wall Design Computations Appendix C System Components Connection Detail Standard Modular Block Details Conceptual ... Retaining Systems Evaluation for Appendices 21 Appendices Appendices.
Evaluation of the Tricon Retained Soil Wall System
... QA / QC program . These documents appeared to be consistent with current industry practice . 5.4 Design QA / QC System design for external ... QC 5.5 Construction and Quality Control Manual (Erection Manual) 5.6 Warranties and Insurance.
Evaluation of Anchor Wall Systems' Landmark Reinforced Soil Wall System with T.C. Mirafi's Miragrid and Miratex Geogrid Reinforcement: Technical Evaluation Report
... Materials and Methods of Sampling and Testing . Part I Materials , American Association of State Highway and Transportation Officials , Washington , D.C. American Society for Testing and Materials ( ASTM ) . 2001a . Volume 04.08 , Soil ...
Evaluation of the SSL MSE Plus Retaining Wall System
... DETAIL 019 STANDARD PANEL 70 SECTION C - C PANEL LOOP POCKET DETAIL PANEL LOOP POCKET DETAIL 25 HORIZONTAL PANEL JOINT DETAIL BEARING PAD DETAIL THESE DRAWINGS ARE CERTIFIED WITH RESPECT TO THE INTERNAL STABILITY OF THE MSE STRUCTURE ...
This website uses cookies and collects data for optimal performance. Your continued use signifies agreement to our Privacy Policy.
