Manual of Instructions for Construction of Roads and Bridges on Federal Highway Projects

Published on: 1970
Page Count: 396 pages
Print Type: BOOK
Categories: Bridges
Maturity Rating: NOT_MATURE
Language: en
Embeddable: Yes
PDF Available: No
EPUB Available: No
ISBN-13: ISBN-13 not available
ISBN-10: ISBN-10 not available
... truck driver , retaining the triplicate in the lis book . The checker on the road shall fill in the station of placement , ini- tial both copies , return the original to the truck driver , and retain the duplicate . To insure delivery ...

Related books - Readers Also Liked

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects

... CLEARING AND GRUBBING Description 201.01 This work shall consist of clearing , grubbing , removing and disposing , or using of all vegetation and debris as designated in the contract , except such objects as are designated to remain in ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects

... snug - tight condition . Snug tight is indicated by partial compression of the direct tension indicator protrusions . Then tighten all fasteners systematically from the most rigid part of the connection to the free edges in a manner ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects. FP-74

... ( ASTM C39 ) . When air entrained concrete is specified , it shall have an air content of 6 per cent plus or minus 2 ... A123 ) . Malleable iron castings shall conform to the requirements of AASHTO M 106 ( ASTM A47 ) . Grade will be ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects. FP-69

... CLEARING AND GRUBBING Description 201.01 This work shall consist of clearing , grubbing , re- moving and disposing of all vegetation and debris within the designated limits except such objects as are designated to remain in place or are ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects

... bolt with hexagonal nuts and heads except that ribbed bolts shall have ... nominal diameter 3/4 inch and over . Heads of bolts shall be tapped with a ... nominal size specified or the next larger nominal size . Diameter of threads shall ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects: FP-61

... A 440 . ( f ) High - strength low - alloy structural steel . ( g ) High - strength , low - alloy structural man- ganese vanadium steel ( to be used for AASHO M 161 welding ) . ( h ) Structural nickel steel ... ( i ) Structural rivet ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects

... ASTM A1011 , Grade 55 ( 380 ) and the following : ( a ) Punching . Starting 1 inch ( 25 millimeters ) from the top and extending the full length of the post , drill or punch 7 / 16 - inch ( 11 - millimeter ) holes on 1 - inch ( 25 ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects. FP

... AASHTO M 170 ( ASTM C76 ) . Water absorption of individual cores taken from ... 199 ( ASTM C478 ) . 712.07 Frames , Gratings , Covers , and Ladder Rungs ... AASHTO M 105 ( ASTM A48 ) . Strength class will be optional unless otherwise ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects

... ( ASTM C478 ) . 712.07 Frames , Gratings , Covers , and Ladder Rungs . Metal units shall conform to the plan dimensions and to the following specification requirements for the designated ma- terials . Metal gratings and covers which are ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects. FP-69

... requirements of ASTM A 233 ( AWS A5.1 ) . In lieu of requiring the contractor to furnish copies of test reports for each shipment of electrodes on a project , a list of approved brands of electrodes may be maintained for which ...

Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects. FP

... AASHTO T 96 . The aggregate shall show a durability factor not less than 35 ... M 91 , Grade SM . Sewer Brick - ASTM C 32 , Grade SM . Building Brick ... 213 , AASHTO M 220 , as specified , and shall be punched to admit the dowels where ...

Relationship of Toll Facilities to the Federal-aid Highway Program: Hearings, Eighty-ninth Congress, Second Session, Before the Special Subcommittee on the Federal-Aid Highway Program and the Subcommittee on Roads

... Department of Commerce_ Page 148 , 560 , 822 Booth , Sherwood K. , Deputy General Counsel , Marion A. Hornbeck , Chief ... Department . Bixby , R. Burdell , Chairman and Secretary of New York State Thru- way Authority , and Holden A. Evans , ...

Model Traffic Ordinance, as Revised and Approved by the National Conference on Street and Highway Safety, 1946. Published Under Authority Contained in the Federal Highway Act (42 Stat. 212) Approved November 9, 1921. Public Roads Administration, Federal Works Agency

... any such stop intersection , and shall erect a stop sign at every such place ... way to any pedestrian as may be necessary to avoid collision , and upon ... approaching so closely on said through highway as to con- stitute an immediate ...

Ana ́lisis de modelos y orientaci ́on ma ́s alla ́

... alcantarillado o las TIC. Según la definición oficial, la infraestructura crítica es un término utilizado para describir los activos que son esenciales para el funcionamiento de una sociedad y una economía. Las siguientes instalaciones ...

Traffic Safety: A Report on the Activities of the National Highway Traffic Safety Administration and the Federal Highway Administration Under the Highway Safety Act of 1966

... help these groups develop programs to cope with the drinking driver . * A ... alcohol traffic programs increased significantly during 1974. The following ... key factor in learning psychomotor skills is practice . Because of the cost ...

Highway Beautification: Public Hearings Before the Commission on Highway Beautification Pursuant to Authority of Sec. 123, Federal-Aid Highway Act of 1970, Public Law 91-605, (84 Stat. 1713), 91st Congress, December 31, 1970

... Maryland . Annotated Code of Maryland . 1968 Cumulative Supplement , Article 8913 , Section 236-262 , " Highway Beautification . " Maryland . Baltimore City . Commission on Signs . Memorandum to Downtown Property Owners and Business ...

Proceedings [of̈ Meeting

... young leafs or sprouts of " kangkung " is done every 15 to 20 days and produced 1 750 bunches of " kangkung " weighing 230 grams per bunch . The plantation of " kangkung " is totally renewed every three months . The " genjer " is ...

The Design of Highway Bridges and the Calculation of Stresses in Bridges Trusses

... live load requires consideration , it gives an added degree of safety to use deformed bars . Where a spandrel filling or ballast is used on top of the arch ring , the dynamic effect of the live load on highway and elec- tric railway ...

Historic Highway Bridges in Wisconsin: pt. 1. Truss bridges

... truss design . Any type of king post highway bridge is now quite rare in Wisconsin . The city of Port Washington has one all - metal example ( D ) , and the Van Loon Wildlife Region near La Crosse has one all - timber example ( E ) ...

This website uses cookies and collects data for optimal performance. Your continued use signifies agreement to our Privacy Policy.